Winter Sale Special 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ex2p65

Exact2Pass Menu

Question # 4

Which of the passive WDM schemes for CRAN fronthaul is correctly described?

A.

Have OAM capability

B.

No active device is required

C.

Active fronthaul equipment required

D.

No OAM capability

Full Access
Question # 5

Execute "route add 10.10.10.0 mask 255.255.255.0 192.168.5.1 -p" in the cmd window of the test computer, which one describes the error below?

A.

Commands are generally used in scenarios where the PC has many network cards

B.

You can use route print to confirm whether the command is executed successfully

C.

The data at destination address 10.10.10.X will be sent through the gateway 192.168.5.1

D.

This command adds a temporary route

Full Access
Question # 6

Regarding DWP, what are the correct descriptions of the following? (Multiple Choice)

A.

Each UE can be configured with 8 dedicated BWPs

B.

The PRB index is the RB index of the bandwidth within the RG, and the CRB is the RB index within the BWP bandwidth.

C.

The initial BWP of the UE is obtained during the cell search process.

D.

The CRB index is the RB index of the bandwidth within the RG, and the PRB is the RB index within the BWP bandwidth.

Full Access
Question # 7

What are the following layer two protocol of the 5G air interface control plane? (Multiple Choice)

A.

SDAP

B.

PDCP

C.

MAC

D.

RLC

Full Access
Question # 8

The VLNA group mode of gNodeB can tag different traffic with VLAN tags based on service type.

A.

True

B.

False

Full Access
Question # 9

When using CPE to perform single-station verification tests on NR networks, it is recommended to bring a portable one

A.

Correct

B.

Errors

Full Access
Question # 10

Which of the following two cells has a large interference from PBCH?

A.

PCI0 and PCI3

B.

PCI0 and PCI1

C.

PCI0 and PCI4

D.

PCI0 and PCI2

Full Access
Question # 11

The bandwidth of PRACH in NR is fixed.

A.

True

B.

False

Full Access
Question # 12

When NSA selects and interprets the 2.6Ghz band networking, the uplink and downlink decoupling scheme can not be used.

A.

Correct

B.

Errors

Full Access
Question # 13

AAU5613 can operate in the 3.5Ghz band.

A.

True

B.

False

Full Access
Question # 14

In the Sub 3G band, the maximum beam number of SSBs in the NR is 16.

A.

True

B.

False

Full Access
Question # 15

gNodeB implements X2 self-configuration via MME.

A.

True

B.

False

Full Access
Question # 16

What compression ratios are supported by the CPRI port of 5G RAN2.1 gNodeB?

A.

3:1compression

B.

2:1compression

C.

1:1 is not compressed

D.

3.2:1compression

Full Access
Question # 17

In the 5G RAN2.0 version, what is the maximum number of 100MHz 64*64 cells supported by a single BBU900?

A.

18

B.

3

C.

6

D.

9

Full Access
Question # 18

Which MML command is used to bind the physical sector of gNodeB to the RF AAU?

A.

ADD SECTOR

B.

ADD NRLOCELL

C.

ADD SECTOREOM

D.

ADD NRCELL

Full Access
Question # 19

Which of the following protocols/data falls under Tier 3?

A.

MAC protocol

B.

IP data

C.

RLC protocol

D.

RRC protocol

Full Access
Question # 20

When verifying the uplink 5G Only offload effect of the NSA network, under normal circumstances, only the NR side has uplink traffic, and the rate is stable, while the LTE side tracks no rate

A.

Correct

B.

Errors

Full Access
Question # 21

What is the fiber pulling capacity between AAU and BBU using eCPRI schemes

A.

5KM

B.

500M

C.

1KM

D.

10KM

Full Access
Question # 22

Which description of NR time domain resources is correct?

A.

1 slot fixed contains 14 symbols

B.

1 subframe is fixed at 1ms

C.

1 slot is fixed at 0.5ms

D.

1 subframe fixed contains 2 slots

Full Access
Question # 23

CPRI fiber is recommended to use multimode fiber when the BBU and RRU are connected more than 150 meters.

A.

True

B.

False

Full Access
Question # 24

In the GL to GL+NR (BBU39XO+BBU5900) evolution path, which of the following devices does not need to be added?

A.

Main control board

B.

GPS

C.

Baseband plate

D.

AAU module

Full Access
Question # 25

5G RAN 2.0 version gNodeB logical cells and sector devices use the command ANDD NRDUCELLTRP to complete the binding.

A.

True

B.

False

Full Access
Question # 26

Which of the following MML commands supports unblocking gNodeB cells?

A.

UBL LOCELL

B.

UBL CELL

C.

UBL GLOCELL

D.

UBL NRCELL

Full Access
Question # 27

In order to support the NSA DC feature on the base station, which of the following options need to be configured?

A.

Configure NR cell NSA DC parameters

B.

Set the tap mode in the gNodeB PDCP parameter group

C.

Configure NR cell QCI bearing

D.

Turn on the NR cell-level algorithm switch

Full Access
Question # 28

Which of the following requirements is generally included in the target rate of urban areas in eMBB scenarios of 5G?

A.

10Gbps peak rate

B.

100-200Mbps continuous coverage

C.

Target rate of 500Mbps

D.

100Mbps continuous coverage

Full Access
Question # 29

When commissioning NR devices, only the "Electronic Serial Number" and "Software Version" can be directly modified in the "Plug and Play" window

A.

Correct

B.

Errors

Full Access
Question # 30

After the 5G network UE is powered on and enters the idle state, what operations will be performed in the Attach process? (Multiple Choice)

A.

Establish the same mobility context between UE and corenet

B.

Through the EPS ATTACH process, UE can also obtain network-assigned IP addresses

C.

Establish default hosting between UE and the core network

D.

Listen on the network to get downstream synchronization

Full Access
Question # 31

Regarding the NR slot structure, what are the correct terms described below?

A.

The symbols in the slot include downstream, upstream, and flexible configuration

B.

Regardless of the subcarrier bandwidth configuration, the number of symbols in 1 slot is fixed at 14

C.

Only downstream data can be passed in the downstream slot

D.

Upstream data can also be transmitted in the downstream slot

Full Access
Question # 32

NR is divided into competitive and non-competitive random access, what is the main purpose of UE triggering random access?

A.

Uplink authorization

B.

Gets system messages

C.

Get upstream synchronization

D.

Send measurement reports

Full Access