Fire-Inspector-II Dumps With Exact Questions and Answers

The fire-resistance rating requirements for different building elements in Type IV (Heavy Timber) construction are specified in the 2021 International Building Code (IBC), Table 601 – Fire-Resistance Rating Requirements for Building Elements (Hours).

IBC Table 601 – Fire Resistance for Type IV Construction:

Interior nonbearing walls and partitions in Type IV construction require 0 hours of fire resistance.

This is because Type IV construction primarily relies on large, heavy timber elements that provide inherent fire resistance.

Why Other Options Are Incorrect?

B. 1 hour – Incorrect, as nonbearing interior walls in Type IV construction are not required to have a fire-resistance rating.

C. 1-1/2 hours – Not required by code.

D. 2 hours – Only structural elements like exterior walls in some cases may require fire resistance, but nonbearing interior partitions do not.

✅ Correct Answer: A. 0 hours

1.

Exit Sign Letter Height Requirement

According to the International Fire Code (IFC) 2021, Section 1013.5, and the International Building Code (IBC) 2021, Section 1013.5, exit sign letters must be at least 6 inches in height. However, the minimum height requirement for the wording within the sign (e.g., "EXIT") is specifically 4 inches.

The stroke width of these letters must be at least 0.5 inches to ensure visibility.

2. Verification of Other Options

Option A (three inches) – Below the minimum height requirement. Incorrect.

Option C (five inches) – Exceeds the minimum standard but is not the correct minimum required size. Incorrect.

Option D (six inches) – This applies to the total EXIT sign height, but the actual letter requirement is 4 inches. Incorrect.

Reference Sources:

International Fire Code (IFC) 2021 – Section 1013.5

International Building Code (IBC) 2021 – Section 1013.5

NFPA 101: Life Safety Code (Exit Sign Requirements)

The occupant load of a space is determined using the 2021 International Building Code (IBC), Table 1004.5 – Maximum Floor Area Per Occupant.

IBC Table 1004.5 – Occupant Load Factor for Exercise Rooms:

The occupant load factor for an exercise room is 1 person per 20 square feet.

Given that the exercise room is 1,000 sq. ft.:

1,000 sq. ft. ÷ 20 sq. ft. per person = 50 occupants

Why Other Options Are Incorrect?

A. 10 – Would require a 100 sq. ft. per person load factor, which is not applicable for exercise rooms.

B. 20 – Incorrect calculation; using the correct load factor, the actual number is 50.

C. 30 – Also incorrect based on the proper load factor.

✅ Correct Answer: D. 50