An Ingress Controller is a Kubernetes resource that provides advanced routing and load balancing for your applications running on a Kubernetes cluster1. An Ingress Controller allows you to define rules that specify how to route traffic to different services in your cluster based on the host name or path of the incoming request1. By deploying an Ingress Controller and using it to expose multiple application endpoints, you can achieve the following benefits1:

• Cost-effectiveness: You only need to create one load balancer instance per cluster, instead of one per service, which reduces the cost of exposing your applications.
• Simplicity: You only need to manage one set of routing rules for all your services, instead of configuring each service separately, which simplifies the application deployment and maintenance.
• Flexibility: You can use different types of Ingress Controllers, such as NGINX or Traefik, that offer various features and customization options for your routing needs.

Explanation

The user is responsible for patching, upgrading, and maintaining the worker nodes in Oracle Cloud Infrastructure (OCI) Container Engine for Kubernetes (OKE). In OKE, the user has control over the worker nodes, which are the compute instances that run the Kubernetes worker components. As the user, you are responsible for managing and maintaining these worker nodes, including tasks such as patching the underlying operating system, upgrading Kubernetes versions, and performing any necessary maintenance activities. While Oracle provides the underlying infrastructure and support services, including managing the control plane and ensuring the availability of the OKE service, the responsibility for managing the worker nodes lies with the user. This allows you to have control and flexibility in managing your Kubernetes environment according to your specific needs and requirements.

An action is a response that you define for the rule to perform when the filter finds a matching event1. The action type specifies the service that you want to invoke by delivering the event message1. The following action types are available in OCI Events rule definition1:

• Streaming: Send to a stream from Oracle Streaming Service.
• Notifications: Send to an Oracle Notification Service topic.
• Functions: Send to an Oracle Functions Service endpoint. Email is not a valid action type for OCI Events rule definition. To send an email as an action, you need to use the Notifications service and subscribe to a topic with an email protocol2.

Explanation

To address the requirement of extracting and transforming data from the Oracle Cloud Infrastructure (OCI) Streaming service and sending it to a third-party REST endpoint using the OCI Service Connector Hub, the best configuration option is: Configure a new service connector as follows: • Source: Streaming • Task: None • Target: Notifications By selecting the Streaming service as the source, you can capture the transactional data from the stream. Since there is a need to transform and send the data to a third-party REST endpoint, you don't need to specify any specific task in the connector. The target is set to Notifications, which allows you to send the transformed data to an endpoint outside of the OCI environment. Notifications can be configured to deliver the data to various supported destinations, including HTTP endpoints, email addresses, and more. This configuration enables you to automate the process of extracting data from the streaming service and sending it to the desired third-party REST endpoint, fulfilling the requirement of extracting, transforming, and forwarding the data.

In the shared responsibility model, Oracle is responsible for securing the underlying cloud infrastructure and platform services, while customers are responsible for securing theirdata and applications within the cloud4. For provisioned OKE clusters, Oracle manages the control plane (master nodes) of the Kubernetes cluster, while customers manage the data plane (worker nodes) of the cluster5. Therefore, it is the responsibility of the customer to perform patching, upgrading, and maintaining of the worker nodes in provisioned OKE clusters5. Customers can use tools such as Terraform or kubectl to automate these tasks5.

Explanation

The correct approach to receive an email each time a Terraform action begins in Oracle Cloud Infrastructure (OCI) Resource Manager without writing any code is as follows: Create an OCI Notification topic and email subscription with the destination email address. This will define the email delivery configuration. Create an OCI Events rule that matches the "Resource Manager Job - Create" condition. This rule will be triggered when a Resource Manager job is created. In the OCI Events rule, select the notification topic that was created in step 1 as the action for the corresponding event. This will ensure that the notification is sent to the specified email address. By following these steps, you can configure the OCI Events service to send an email notification whenever a Resource Manager job is created in OCI Resource Manager.

Explanation

The correct API method to read and process a stream in the Oracle Cloud Infrastructure (OCI) Streaming service is "GetMessages". When consuming messages from a stream in OCI Streaming, you use the "GetMessages" API method. This method allows you to retrieve a batch of messages from the stream for processing. You can specify parameters such as the number of messages to retrieve, the maximum size of the messages, and the timeout for the request. By using the "GetMessages" API method, you can retrieve messages from the stream and then process them in your microservices application. This allows you to consume and handle the data in real-time as it becomes available in the stream. The "GetMessages" method provides flexibility in how you consume and process the messages, enabling you to implement custom logic and workflows based on your specific application requirements.

Explanation

The maximum execution time of Oracle Functions is 300 seconds, which is equivalent to 5 minutes. This means that a function running within Oracle Functions cannot exceed a runtime of 5 minutes. If a function requires longer execution times, alternative approaches such as invoking external services asynchronously or using long-running processes should be considered. It is important to design functions with this execution time limitation in mind to ensure optimal performance and efficiency within the Oracle Functions platform.

Explanation

The correct answer is: "read only." The layers of a Docker image are read-only. Once a layer is created, it cannot be modified. Each layer represents a Dockerfile instruction, and it is stacked on top of the previous layer, forming a stack of immutable layers. These layers are designed to be read-only to ensure consistency and integrity of the image. When a Docker image is built, each instruction in the Dockerfile creates a new layer. Each layer represents the changes made by that instruction relative to the previous layer. The layers are stacked on top of each other to form the complete image. This layer-based approach allows for efficient storage and distribution of Docker images. Because the layers are read-only, any changes or modifications to the image result in the creation of new layers rather than modifying the existing ones. This immutability ensures that each layer remains intact and preserves the integrity of the image. It also enables Docker's caching mechanism, where previously built layers can be reused if the corresponding instructions haven't changed, speeding up the image build process. The other options mentioned, such as "write only," "write once," "movable," and "read mostly," do not accurately describe the permission associated with Docker image layers. Docker image layers are specifically designed to be read-only.

To push a new Docker container image to a repository in OCI Registry, you need to use an Auth Token to complete the authentication via the Docker CLI1. An Auth Token is a secure, auto-generated password that you can use to authenticate with OCI services such as OCI Registry1. You can generate an Auth Token in the Console by following these steps1:

• In the top-right corner of the Console, open the Profile menu and then click User settings to view the details.
• On the Auth Tokens page, click Generate Token.
• Enter a friendly description for the auth token. Avoid entering confidential information.
• Click Generate Token. The new auth token is displayed.
• Copy the auth token immediately to a secure location from where you can retrieve it later, because you won’t see the auth token again in the Console.
• Close the Generate Token dialog. After generating an Auth Token, you need to log in to OCI Registry by entering docker login .ocir.io in a terminal window on the client machine running Docker, where corresponds to the key for the OCI Registry region you’re using1. When prompted for a username, enter your username in the format /, where is the auto-generated Object Storage namespace string of your tenancy1. When prompted for a password, enter the Auth Token you copied earlier1.

Explanation

The term that describes a group formed by a master machine and a worker machine in a Kubernetes architecture is "Cluster". A cluster in Kubernetes consists of one or more master machines and multiple worker machines (also known as nodes). The master machine manages the overall control plane and orchestrates the deployment and management of containers on the worker nodes. The worker nodes are responsible for running the containers and executing the workloads. The cluster is the fundamental unit of organization and management in Kubernetes, providing the infrastructure and resources to run and manage containerized applications. It ensures high availability, scalability, and fault tolerance for the applications deployed within it.

Explanation

The correct statements about deleting a Kubernetes cluster are: If you change the auto-generated name of a worker node and then delete the cluster, the renamed worker node is not deleted. Changing the name of a worker node does not affect its deletion when the cluster is deleted. The cluster deletion process does not consider the renamed worker nodes and will delete all worker nodes associated with the cluster. Upon deleting a cluster, no other resources created during the cluster creation process or associated with the cluster (such as VCNs, Internet Gateways, NAT Gateways, Route Tables, Security Lists, Load Balancers, and Block Volumes) are deleted automatically. These additional resources are not automatically deleted when the cluster is deleted. You need to manage the deletion of these resources separately, if desired. Therefore, the correct statements are that the renamed worker nodes are not deleted when the cluster is deleted, and other associated resources are not automatically deleted when the cluster is deleted.

OCI Streaming is a fully managed, scalable, and durable messaging solution for ingesting continuous, high-volume streams of data that you can consume and process in real-time1. Streaming is suitable for any use case in which data is produced and processed continually and sequentially in a publish-subscribe messaging model1. Streaming can handle millions of messages per second with low latency2. Therefore, OCI Streaming is the most appropriate choice for handling real-time data feeds from a fleet of vehicles.Verified References: Overview of Streaming, Container Engine for Kubernetes

Explanation

Oracle Cloud Infrastructure (OCI) API Gateway supports various backend-types to handle incoming requests and route them to the appropriate backend service. However, "ORACLE_STREAMS_BACKEND" is not a valid backend-type in OCI API Gateway. "STOCK_RESPONSE_BACKEND" is a valid backend-type that allows you to configure static responses directly in the API Gateway without routing requests to any specific backend service. This can be useful for handling simple requests or returning predefined responses. "HTTP BACKEND" is another valid backend-type that enables routing requests to an HTTP backend service. "ORACLE_FUNCTIONS_BACKEND" is a valid backend-type that allows you to route requests to Oracle Functions, which are serverless functions that can be used to execute specific logic or operations. However, "ORACLE_STREAMS_BACKEND" is not a valid backend-type in OCI API Gateway. The API Gateway does not have native support for Oracle Streams as a backend service. Oracle Streams is a feature of Oracle Database that provides a publish-subscribe mechanism for data replication and distribution within an Oracle Database environment. It is not directly integrated as a backend service in OCI API Gateway.

Explanation

The correct answer is: "Resiliency is about recovering from failures without downtime or data loss." Service resiliency, in the context of cloud-native applications, is the ability of a service or system to recover from failures and continue functioning without downtime or data loss. It involves designing and implementing mechanisms to handle failures, such as network outages, hardware failures, or software errors, in a way that minimizes the impact on the overall system. The goal of resiliency isto ensure that the application or service can continue to operate and provide a certain level of functionality, even in the face of failures. This typically involves techniques such as redundancy, fault tolerance, and graceful degradation. By implementing resiliency measures, a cloud-native application can recover and adapt to failures, maintain availability, and preserve data integrity. The other statements are not accurate regarding service resiliency: Resiliency is not about not bringing a service to a functioning state after a failure. Instead, it is about recovering from failures and ensuring continued functionality. Resiliency is not about avoiding failures entirely. While it is desirable to prevent failures, resiliency focuses on the ability to handle and recover from failures when they do occur. Resiliency testing is not limited to a test environment. It is important to test and validate the resiliency measures in both test environments and production environments to ensure the application can effectively handle failures in real-world scenarios.

Explanation

The two true statements for serverless computing and serverless architectures are: Applications running on a FaaS (Functions as a Service) platform: Serverless architectures typically involve running code in the form of functions on a serverless platform. These functions are event-driven and executed in response to specific triggers or events. Serverless function execution is fully managed by a third party: In serverless computing, the cloud provider takes care of the infrastructure management and resource provisioning. The execution of serverless functions is handled automatically by the platform, relieving developers from the responsibility of managing servers orinfrastructure. It's important to note that long running tasks are not typically suited for serverless architectures due to the event-driven nature of serverless functions. Also, while serverless functions may have state, it is recommended to avoid external storage dependencies and instead leverage stateless functions whenever possible. Additionally, scaling in serverless architectures is typically handled automatically by the platform, rather than being the responsibility of the application DevOps team.

Explanation

The two "Action Type" options that are NOT available in an Oracle Cloud Infrastructure (OCI) Events rule definition are: Email (Correct) Slack (Correct) The available "Action Type" options in OCI Events rule definition include Functions, Notifications, and Streaming. However, email and Slack are not directly supported as action types in OCI Events. Instead, you can use Notifications to send notifications to various notification channels, including email and Slack, through the OCI Notifications service.

Explanation

In the given scenario, the developer should use the approach of creating an authorizer function using token-based authorization. Token-based authorization is a commonly used approach for authenticating API requests. It involves generating and issuing tokens to API callers, which they can then include in the requests they make to the API. The tokens serve as proof of authentication and are validated by the server to ensure the caller's identity and access rights. By creating an authorizer function using token-based authorization, the developer can implement a custom scheme that accepts string-based parameters from the API caller. This allows the developer to define their own authentication logic and validate the provided tokens according to their requirements. The authorizer function can be configured in the OCI API Gateway to be invoked before forwarding the request to the web application. It will perform the necessary token validation and authenticationchecks, allowing only authorized requests to access the protected resources of the web application.

Explanation

The correct options are: A configured OCI API signing key pair: The API signing key pair is used for authentication and authorization to access OCI resources, including the OKE cluster. The private key should be configured on your local machine to authenticate API requests. An SSH key pair with the public key added to the cluster worker nodes: This is required for secure SSH access to the worker nodes in the OKE cluster. You need to generate an SSH key pair and add the public key to the cluster's worker node pool during cluster creation or update. Therefore, the correct options are having a configured OCI API signing key pair and an SSH key pair with the public key added to the cluster worker nodes.

Explanation

To provision storage buckets as part of your Kubernetes deployment process for an application that depends on Oracle Cloud Infrastructure (OCI) Object Storage, you should leverage the OCI Service Broker for Kubernetes. OCI Service Broker for Kubernetes enables you to provision and manage OCI resources, including Object Storage buckets, directly from Kubernetes. It provides a Kubernetes-native experience for managing OCI services, allowing you to define and manage OCI resources as part of your application deployment process. By using the OCI Service Broker for Kubernetes, you can define the required Object Storage buckets in your Kubernetes manifests, and the service broker will handle the provisioning and management of those buckets in OCI, ensuring that they are available for your application wherever it is running.

A pod is the smallest and simplest unit in the Kubernetes object model that you create or deploy2. A pod represents a single instance of a running process in your cluster. Pods contain one or more containers, such as Docker containers. When you create a pod, you define how much CPU and memory (RAM) each container needs. A pod can also include storage volumes, IP addresses, options that govern how the container(s) should run, and more2. Pods are the basic building blocks of larger Kubernetes constructs such as deployments, replica sets, and services2.

OCI API Gateway supports the following authentication methods for accessing an API deployment3:

• HTTP Basic: The client sends a username and password with each request. The credentials are validated against a user database in Oracle Identity Cloud Service (IDCS).
• API Key: The client sends an API key with each request. The API key is validated against a list of keys stored in IDCS or OCI Vault.
• OAuth: The client obtains an access token from an authorization server (such as IDCS) and sends it with each request. The access token is validated against the authorization server and optionally checked for required scopes.
• JWT Token: The client obtains a JSON Web Token (JWT) from an identity provider (such as IDCS or OCI IAM) and sends it with each request. The JWT is validated against the identity provider’s public key and optionally checked for required claims. SAML Token is not a valid authentication method for accessing an OCI API Gateway deployment. SAML is an XML-based standard for exchanging authentication and authorization data between different parties, such as a service provider and an identity provider4. SAML tokens are typically used for web browser single sign-on (SSO) scenarios, not for API access4.

Explanation

The correct answer in this scenario is to use the OCI API Gateway service and configure rate limiting. Using the OCI API Gateway service and configuring rate limiting is an effective approach to address Distributed Denial-of-Service (DDoS) attacks. By implementing rate limiting, you can control the number of requests that can be made to your web service within a specific time frame. This helps to prevent overload and ensures that your service can handle legitimate traffic while mitigating the impact of DDoS attacks. By leveraging the OCI API Gateway service, you can easily configure rate limiting rules to restrict the number of requests per second or per minute. This allows you to set appropriate thresholds and safeguard your web service from being overwhelmed by excessive requests. The API Gateway acts as a protective layer, filtering out malicious traffic and ensuring the smooth operation of your service. While options like OCI Virtual Cloud Network (VCN) segregation and third-party service integrations may contribute to overall security, they do not specifically address DDoS attacks as efficiently as rate limiting. VCN segregation focuses more on network segmentation and isolation, while third-party service integration may introduce additional dependencies and complexities. Re-writing your web service and implementing rate limiting is a viable option, but it may not be feasible considering the time constraints mentioned. Leveraging the OCI API Gateway service provides a quicker and easier solution to implement DDoS attack mitigation through rate limiting.

The logconfig.json file is a configuration file that specifies how the Unified Monitoring Agent collects and uploads custom logs to the OCI Logging service2. The logconfig.json file contains an array of objects, each representing a custom log configuration2. Each custom log configuration object has the following fields2:

• logGroupObjectId: The OCID of the log group where the custom log is stored.
• logObjectId: The OCID of the custom log.
• paths: An array of paths to files or directories containing the custom logs.
• src: A regular expression that matches the files containing the custom logs.
• parser: A parser definition that specifies how to parse the custom logs. If the logconfig.json file has incorrect or missing OCID for the custom log in the logobjectId field, or incorrect or missing OCID for the custom log group in the logGroupObjectId field, then the Unified Monitoring Agent will not be able to upload the custom logs to the OCI Logging service2. Therefore, these are potential reasons for logs from the Meshifyd application not showing up in the OCI Logging service. Verified References: Unified Monitoring Agent Configuration File

Explanation

The necessary configuration to provide access to a private repository in OCI Registry (OCIR) from OCI Container Engine for Kubernetes (OKE) is to create a docker-registry secret for OCIR with an identity Auth Token on the cluster and specify the imagePullSecret property in the application deployment manifest. Here's the breakdown of the steps: Create a docker-registry secret for OCIR with an identity Auth Token: In order to authenticate with the private repository in OCIR, you need to create a secret in your OKE cluster that contains the necessary credentials. This can be done by generating an identity Auth Token from the OCI Console and creating a secret in the cluster using the kubectl command. Specify the imagePullSecret property in the application deployment manifest: In your application's deployment manifest (such as a Kubernetes Deployment or StatefulSet YAML file), you need to include the imagePullSecret property and specify the name of the secret you created in the previous step. This allows the OKE cluster to use the credentials from the secret to pull the docker image from the private repository in OCIR during deployment. By following these steps, you can ensure that your OKE cluster has the necessary access to the private repository in OCIR, and your application can successfully pull the required docker image during deployment.

Explanation

The correct value for the "type" field in the API deployment specification is "STOCK_RESPONSE_BACKEND". By setting the "type" to "STOCK_RESPONSE_BACKEND", you are indicating that the backend for the specified route should return a pre-defined response. This type of backend is commonly used when you want a specific response to be returned consistently, regardless of the actual backend service implementation. In this case, the API deployment specification is configured to have a single route with the path "/hello" and the method "GET". The backend section specifies the type as "STOCK_RESPONSE_BACKEND". Additionally, it defines the response status code as 200, setsthe "Content-Type" header to "application/json", and provides the JSON content in the "body" field. Using this configuration, any request to the "/hello" path with the "GET" method will always receive a consistent JSON response with the content "{"myjson": "consistent response"}".

To prevent images from being deleted from a repository, you can set the global policy of image retention to “Retain All Images”. This policy applies to all repositories in the tenancy and overrides any individual repository settings. You can also lock the policy to prevent any changes to it.Verified References: Using Retention Rules to Preserve Data